Best Guide For Concrete Polishing
One of the industries that have undergone great evolution is the polishing industry. The companies that are growing and those that are coming up now are too many in this industry. Still other companies will start as most people are getting into this industry. Quality concrete polishing can be done with the companies that apply the tips contained in this article. The tips are explained well below.
The first tip of concrete polishing is to determine the surface hardness. Testing the concrete hardness is done with the use of concrete hardness tester. This helps in the selection of the abrasives. The surface can be scratched using the first tip with the largest number. Then the scratching is done in a descending order. This continues to a level where the tip cannot do scratching anymore. At this level, the hardness is ok now.
Then the preparation of the concrete surface is done as the next thing. Sometimes one can get the coated floors. Here, the coat is removed with the right equipment. The type of coating is what affects the equipment to be used in the removal of this coat. Some floors may be damaged. These holes and cracks should be repaired first. The next thing that should be done is gritting with the metal bond tooling to the level and flatness that is desired.
The tool marks are then eliminated. This can be done effectively with the use of the transitional tooling. The ability of transitional tooling to eliminate all the marks is high. This is done to a level where there is no tool mark that remains.
Then the floor is densified and hardened by vacuuming it. The pore and crack filer is used to densify and solidify the surface of the floor. It helps avoid water penetration that can result in stains that can result due to water penetration. However, care should be taken to avoid pooling of the floor by the densifiers. Pooling creates stains that can harden the process of polishing.
After all the above things are done effectively, the polishing is now done. One is advised to start with the resign band. Then the space between the passes is vacuumed to remove the dust. Then with a burnishing pad, the floor is burnished when the final grit level is reached.
Then now the floor is protected. The floor get the protection by the sealing it. This will protect the surface from things like grease, oil, and any other chemicals. The pump can be used to apply the sealer to the floor. Then burnishing is done to ensure the floor shines. These are the best ideas that can allow successful concrete polishing.